Home > PLUMBING > KITCHEN & BATH > SHOWER & BATH REPAIR
Choose a sub category:
SHOWER HEADS SHOWER HEAD PARTS & ACCESS. TUB SPOUTS
TUB & SHOWER DRAINS/PARTS
Sort By:
1 2 3 ... 12
Oatey 43561 Snap-In Floor Drain GASKET SHOWERHEAD 3 PACK      GASKET TUB DRAIN CARTRIDGE
Oatey Floor Drain, Snap-In, PVC, Oatey, 2 in Connection, Solvent Weld Connection, Suitable For Use With: SCH 40 DWV PVC Pipe, 2-1/4 in Strainer, 1 in Overall Height, 2-1/4 in Overall Width, 2-1/4 in Overall Length, White, UPC, CSA Certified, ISO 9001 Certified, For Drainage in Areas Where a Waterproofing Membrane is not Required Rubber construction, 3/8" inner diameter, 3/4" outer diameter. Prevents leaks between shower arm and shower head. Includes three washers. Rubber, for tip-toe style bathtub stoppers. 2-1/16" x 1" x 1/4".
COVER DRAIN CLIP SHOWER3-3/8IN Oatey 42042 Tile Rings STRAINER TUB SNAP 2IN CHROME
Aluminum steel construction. Designed to fit 3-3/8" shower drains. Oatey Tile Ring, Series: 151, Square, Suitable For Use With: 151 Series Cast Iron Shower Drains, 4-1/4 X 4-1/4 in, Stainless Steel, Chrome Plated, 3-1/4 in Outside Diameter Steel construction, 2" diameter, grid-style.
Oatey 43565 Snap-In Floor Drain Screw-Tite 42358 Replacement Strainer Danco 80001 Tub Spout Ring
Oatey Floor Drain, Snap-In, PVC, Oatey, 3 in Connection, Solvent Weld Connection, Suitable For Use With: SCH 40 DWV PVC Pipe, 3-1/2 in Strainer, 1-3/4 in Overall Height, 3-1/2 in Overall Width, 3-1/2 in Overall Length, White, UPC, CSA Certified, ISO 9001 Certified, For Drainage in Areas Where a Waterproofing Membrane is not Required Screw-Tite Strainer, Replacement, Stainless Steel, Screw-Tite, Suitable For Use With: Screw-On Tile Shower Drains, 4 in Snap-In Drains and 2 or 3 in General Purpose Drains, 4 in Diameter, Includes: (2) Screws, ISO 9001 Danco Tub Spout Ring, 3-5/8 in OD 2-1/4 in ID, 7/16 in Thick, Chrome Plated
Oatey 43569 Snap-In Floor Drain Plumb Pak PP826-64 Strainer Dome Cover Danco 80002 Tub Spout Ring
Oatey Floor Drain, Snap-In, PVC, Oatey, 4 in Connection, Solvent Weld Connection, Suitable For Use With: SCH 40 DWV PVC Pipe, 4-1/2 in Strainer, 1-3/4 in Overall Height, 4-1/2 in Overall Width, 4-1/2 in Overall Length, White, UPC, CSA Certified, ISO 9001 Certified, For Drainage in Areas Where a Waterproofing Membrane is not Required Plumb Pak Strainer Dome Cover, 3 in Diameter, 1-1/2 in Screw Length, Chrome Danco Tub Spout Ring, 3-5/8 in OD 2-1/4 in ID, Brushed Nickel, For Drywall Taping and Patching
STRAINER SHOWER 3-3/8IN CHROME PLATE OVERFLOW 1-HOLE CHROME  Plumb Pak Water Saver Economy Showerhead
Steel construction, use with 3-1/8" drains. Screws not included. Round design with screw holes 2" center-to-center. Includes adapter to replace one or two hole plates. Screws included. Plumb Pak Showerhead, Economy, Series: Water Saver, 1/2 in Connection, Plastic, White, For Indoor/Outdoor Application
STRAINER TUB 2-15/16 BRSH NIC SHOWERHEAD ADJ ABS CHM 1-3/4IN Plumb Pak Water Saver Economy Showerhead
2-15/16" diameter, brushed nickel finish. Replaces Gerber no. 91-292 Plumb Pak Showerhead, Economy, Series: Water Saver, 2.5 gpm, 1/2 in Connection, Plastic, Chrome Plated, For Indoor/Outdoor Application
SHOWERHEAD M-HOME/RV CHROME   FLANGE ARM SHOWER W/SCREW     FLANGE SHOWER ARM CHROME
Constructed of durable plastic, 1/2" IPS connection. Metal construction, fits 1/2" IPS connection. Set screw style.
DRAIN SHOWER STALL 2 FIP      Mintcraft B1140WH Shower Arms DIVERTER TUB SPOUT REPAIR KIT
Female threaded outlet, stainless steel grid, 3-1/2" flange diameter. MintCraft Shower Arm, Plastic, White, 7 in Length, 1/2 in Standard, For Shower Installation Includes lift knob, repairs diverters in most tub spouts. Complete kit.
VALVE SHOWER CONTROL CHROME   Plumb Pak PP825-50 Shower Drain Grid Plumb Pak PP825-7 Shower Arm Diverter
Brass construction, fits standard 1/2" IPS connection, small trickle of water reminds user to shut water off at shower handle when done. For use between shower arm and head. Plumb Pak Shower Drain Grid, Chrome Plated, 3-5/16 in Plumb Pak Shower Arm Diverter, 1/2 in FIP X 1/2 in MIP X 1/2 in MIP, Plastic, Plated
World Wide Sourcing 24500 Bathtub Spouts Oatey 42787 Shower Drain B & K 133-106 Shower Drain
Zinc body; chrome plated finish with reducer bushing. For 3/4'' or 1/2'' pipe. Oatey Offset Shower Drain, Series: 103, 2 in, Pvc or ABS Plastic, White/Black B & K Shower Drain, Plastic, B & K, 2 in Connection, Solvent Weld Connection, Suitable For Use With: 2 in DWV or SCH 40 ABS or PVC Pipe, 4-1/2 in Flange, Used on Steel, Fiberglass and Other Types of Plastic Shower Bases
   
 
1 2 3 ... 12